No More Notching Carpenters used to routinely notch out the base of deck posts to slip them over the band joist. That's now ruled out, Most states now require a specific bolted connection where deck rail posts attach to the floor frame, with reinforcement for joists and blocking. Here's a look at how it's
Sturdy deck railings are critical safety features for raised decks and must meet stringent deck codes. CLICK TO ENLARGE Posts outside the rim joist are the most common and simplest to install. At inside and outside corners where two railings meet, I often use a galvanized steel angle or flat brace to support the joint .
You can remove the worn out decking and railing, and then replace it with new, low-maintenance decking and railing a brand-new deck for a lot less money. . And we've teamed up prefinished aluminum spindles with a “Uniball” anchoring system for a rail system that's foolproof to install and maintenance free as well.
There are many ways to attach deck posts, so for practical reasons we decided to limit the possibilities to methods frequently used by carpenters in our geographic area. What's being built. By far the most common details we found locally were the cases shown in Figure 1, where the post attaches to a “band joist” at the outer
Got a question about deck railings or deck railing installation? We've assembled our customers' most common questions below. If you don't find what you're looking for, just call DecksDirect.com at 1-888-824-5316, 7 a.m. to 5:30 p.m. CST, Monday through Friday. Do I have to install rails on my deck? Or is that just required if
Measure the length of the deck span to receive the railing with a tape measure. Lay out positions for the posts evenly spaced along the rail, no more than 8 feet apart. Also measure the height of the deck from the bottom of the rim joist to the top of the deck planking.